Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting & Tips; Warranty - Fluval SEA SP2 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 21
PUMP BASE
a) Pump must always be stable and fixed. It has to be secured installed on a flat and levelled surface.
b) In case of difficulty removing the pump from its base, check that the pump based is free from dirt. Just in case clean the pump
and the pump base in tap water.
TROUBLESHOOTING TIPS
LOW FLOW FROM PUMP
• Check the hose for blockages.
• Check that the pump is free of dirt and debris.
NO FLOW FROM PUMP
• Check that the power supply is on.
• Check that the plug is correctly connected to the electrical receptacle/socket.
• Check the hose for blockages.
• Check that the pump is free from dirt, debris and/or any obstructions.
• Check that the Impeller Assembly is free from dirt, debris and/or any obstructions. If the Impeller Assembly is damaged it must
be replaced with the appropriate spare part.
REPLACING THE BUSHING AND O-RING / BUSHING AND RUBBER SUPPORT
Though the bushing is made of very resistant material, it is prone to wearing in certain conditions. For this reason, it is recommended
that you replace it whenever the impeller unit is replaced. Follow the instructions provided with the replacement parts package.
Once you have replaced the Bushing and O-Ring (Fluval Sea Aquarium Pump SP4, SP6) or Bushing and Rubber Support
(Fluval Sea Aquarium Pump SP2), reassemble all parts with care.
REPLACEMENT PARTS TABLE
DESCRIPTION
Pump Base
Pump Motor
Impeller Cover
Impeller Assembly
Threaded Fitting & Gasket (2 pcs)
Seal Ring
Impeller Well Cover

WARRANTY

Fluval Sea Aquarium Pumps are guaranteed against defects in material or workmanship under normal aquarium usage and service
for 3 years. We offer a 3 year guarantee on all non replaceable parts which means that the pump will be repaired or replaced at the
manufacturer's discretion, free of charge, when the complete pump is returned with proof of purchase and postage paid. This warranty
does apply to any pump that has been subjected to misuse, negligence or tampering. No liability is assumed with respect to loss or
damage to livestock or personal property irrespective of the cause thereof.
FLUVAL SEA SP2
(Art. #)
A20334
A20310
A20322
A20316
A20330 (1" / 25.4mm)
PT762
PT768
FLUVAL SEA SP4
(Art. #)
A20334
A20312
A20324
A20318
A20330 (1" / 25.4mm)
PT764
n/a
FLUVAL SEA SP6
(Art. #)
A20334
A20314
A20326
A20320
A20332 (1 1/4" / 32mm)
PT764
n/a

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sea sp4Sea sp6

Inhaltsverzeichnis