Removing The Old Dial - eqiva CC-RT-O-CnL-W-R5-2-EQ Bedienungsanleitung

6.1

Removing the old dial

Rotate the thermostat dial to the maximum value (A) (anti-
clockwise). The thermostat dial then no longer presses against
the valve spigot, making it easier to remove.
There are different ways of fixing the position of the thermostat
dial:
• Union nut: Unscrew the union nut in an anticlockwise direc-
tion (B). Then you can remove the thermostat head (C).
• Snap-on fastenings: Thermostat dials that have been atta-
ched using this method can be easily released by giving the
lock/union nut a slight turn in the anticlockwise direction (B).
Then you can remove the thermostat head (C).
• Compression fitting: The thermostat dial is held in place by
a mounting ring which is held together with a screw. Release
this screw and remove the thermostat head from the valve
(C).
• Threaded connection with set screw: Release the setscrew
and remove the thermostat head (C).
37 37