Installing The Digitelmo 1 Software - Viola DIGITELMO 1 Bedienungsanleitung

The drivers will now be acquired automatically from the CD-ROM in
serted, and installed
GB
Fig. 4.4: Software being installed
> When these steps have been completed, the drivers for the DIGI-
TELMO 1 module will have been installed.
Fig. 4.5: Completing the Assistant function
> To complete the installation, click on Complete the installation.
The message displayed in the window after this entry will confirm
that the new hardware has been correctly installed.
Fig. 4.6: New hardware installed

5 Installing the DIGITELMO 1 software

> If this has not yet been done, insert the DIGITELMO 1 installation
CD-ROM in your CD-ROM drive.
> The installation of the DIGITELMO 1 software located on the CD-
ROM should now be started automatically. Initially, a message will be
displayed allowing you to select the language in which the installation
is to be performed.
If the installation assistant does not start automatically, proceed as
follows:
24