Lubrication; Oiler Setting; Suggested Components For Safe Operation - Westfalia 80 22 05 Bedienungsanleitung

 Keep the magazine channel free from debris and foreign objects.

Lubrication

Pneumatic tools have to be lubricated always sufficiently. This is done
continuously and safest by using an oil-fog lubricator. If the oiler is
mounted centrally at the compressor or mounted firmly at the end of the
compressed-air pipe installation, use only a hose with a length of max. 10
m. If the hose is longer, the nebulisation disappears in the air. The oil floats
inside the hose and does not arrive at the air tool.

Oiler Setting

Hose up to 5 m
Hose up to 10 m every minute
If you do not have an oiler at yours disposal, please put a few drops of oil
into the compressed-air connection (3) before every machine usage.
Lubricate the air tool once more after use, especially if you do not operate
the unit for a long time. Further maintenance work is not necessary.

Suggested Components for safe Operation

1.
1. Air Stapler & Nailer
2. Quick Coupling Adaptor
3. Pneumatic Pipe with Quick Couplers at both sides
4. Quick Coupling Adaptor
5. Quick Coupling
6. Valve
7. Oil-fog Lubricator
8. Pressure Regulator
9. Filter Unit
10. Air Source (Compressor)
Operation
every 2 minutes 1 drop
2.
3.
1 drop
5.
4.
6.
22
7.
9.
8.
10.