Getting Started; Package Contents; Safety Information - Schwaiger SAT-Finder plus SF 9000 Bedienungsanleitung

1

Getting started

1.1 Package contents

SAT-Finder plus
Connection cable 70 cm
Carrying strap
Quick reference guide (in 16 languages)
Operating instructions

1.2 Safety information

Before using the unit for the first time, read and follow the safety instructions
carefully!
Be sure to think of your own safety when setting up your system (slippery roof,
risk of falling).
Do not use the SAT-Finder plus if there is visible damage to the unit or the con-
necting cables. Be careful that the cables do not pose a risk of tripping.
Make sure that you don't trap or crush the connecting cables.
The antenna used must be earthed.
The SAT-Finder plus is only designed for the short-term set up of a satellite system.
Continuous use can damage the unit.
The unit must not be used in the immediate vicinity of inflammable materials.
Only have repairs carried out by our qualified service personnel. Attempts to open
or repair the unit yourself will void the warranty.
1.3 Connecting the SAT-Finder plus
Using the coax cable supplied with the unit, connect the socket on the SAT-Finder
plus marked 'LNB' directly to your LNB. Then connect a power source to the 'REC'
socket, either via a DVB-receiver, multiswitch, the SCHWAIGER DC switch with
power supply unit (GW 9000) or rechargeable battery pack (SF 9000Akku). Only
tighten the nuts by hand.
Important:
As some receivers do not correctly conform to the norm for H/V switching voltages,
we recommend that if you have old or especially long cables to use the GW9000
DC splitter for power supply purposes, to ensure that the SAT-Finder plus has
sufficient power.
Suitable LNB types:
• Single-LNB
• Twin-LNB
• Quad/Quattro-Switch-LNB
• Quattro-LNB
• Monoblock-LNBs
21