Hardware Installation; Package Contents; System Requirements - Belkin F8T030 Installationsanleitung

P74186ea_F8T030_QIG.qxd 11-04-2003 08:51
Congratulations and thank you for purchasing the Bluetooth Access Point with USB
Print Server (the AP) from Belkin. This guide will lead you through the basic steps
needed for installation. For further information, please refer to the Belkin User Manual
included with your packaging.

Package Contents

• Bluetooth Access Point with USB Print Server
• Print Server Utility CD-ROM
• 5V DC, 1A Power Supply
• User Manual
• Quick Installation Guide
• Registration Card

System Requirements

• A computing device equipped with Bluetooth wireless technology
• TCP/IP networking protocol installed in each wired computer connected to the LAN
Page 4
Introduction

Hardware Installation

Connecting Network Cables and Powering On
1. Connect one end of a standard CAT5 twisted-pair cable to the RJ45 connector on
the AP and connect the other end to a 10Base-T or 100Base-T Ethernet router,
switch, or wall jack.
wall jack