Troubleshooting - Hornbach FQ-ELH 2500 Handbuch

Troubleshooting

Warning! Make sure the appliance is switched off and unplugged.
Always wear protective gloves.
Problem
Motor does not
run
Motor power
drops
Strong vibration
of the appliance
Cutting blade
does not rotate
EN
106
Possible cause
Faulty extension cable
Power turned off
Circuit breaker tripped
Collection box is not
locked the machine
Forward/Reverse button
switch is in center posi-
tion
Blade is blocked
Intake opening or
discharge chute are
blocked
Cutting blade damaged
Cutting blade obstruct-
ed
Solution
Check extension cable
Turn power on
Press circuit breaker before
switching on
Lock the collection box to the
machine
Set Forward/Reverse button to
forward or reverse setting
Check intake opening and dis-
charge chute for obstructions
and remove them
Check intake opening and dis-
charge chute for obstructions
and remove them
Replace cutting blade
Check intake opening and dis-
charge chute for obstructions
and remove them