Product Overview; Intended Use; Using The Product; Using The Machine - Hornbach FQ-ELH 2500 Handbuch

Product overview

1 Plunger
2 Controls
3 Main handle
4
Power connector
5
Lock lever
6 Wheel
7 Intake opening
8 Blade adjustment knob
9 Collection box
10 Rack
11 Foot
12 Wheel cover
13 ON Switch
14 Circuit breaker
15 Direction switch
16 OFF Switch

Intended Use

The machine is intended for shred-
ding of wooden and fibrous garden
waste for compost purposes, like:
- Twigs and Branches up to a ø of
40 mm.
- Waste from trimming and pruning
bushes and hedges.
- Plant materials like leaves, roots
and other garden waste.
Any other use or modification to the
machine is considered as improper
use and could cause considerable
dangers.
The machine is not intended for com-
mercial use.
Preparing the shredder
1
Install the wheels 6 and feet 11
to the rack 10 as shown.
Install the wheel covers 12 to
the wheels 6.
EN
102

Using the machine

Caution! Before start using
the machine, check the pro-
tective devices and fastening ele-
ments for damage.
Do not use the machine if it is
damaged.
1. Inspect the material to be shred-
ded before starting. Remove any
objects that are not suitable for
shredding or could entangle the
blades [metal parts, stones, bot-
tles, cans, etc].
2. Place the machine on a firm level
ground and do not move it during
operation.
3. Use the ON switch 13 to switch the
machine on and wait until the mo-
tor has reached full speed.
4. Insert the shredding material into
the intake opening 7, but do not
overload the machine.
5. Make sure the shredded material
can fall freely into the colletction
box 9.
6. Use the plunger 1 to push smaller
material down to the blades.
7. Regularly clean the collection box
from shredded material.
Warning! Only use the plung-
er in order to push material
down to the blades.
2
Install the machine to the
rack 10 as shown, by use of 4
screws and washers.
Caution! Make sure the appli-
ance is switched off and un-
plugged.