Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Information; Intended Use; Identification Plate - Wolf Garten Li-High Energy 72V Originalbetriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
EN
Danger levels
The following danger levels are used
in this instruction manual, to indicate
potentially dangerous situations:
A dangerous situation may
occur and, if the measures
are not followed, will result
in severe injury and even
death.
A possibly harmful situation may
occur which if not avoided will result in
property damage.
Safety information content
Type and source of the
danger!
 Consequences of non‑ob‑
servation
¾ Measure for preventing
the danger
Electrical safety
¾ Keep the battery away from rain or
damp .
¾ Keep the device clean . Dirt increases
the risk of an electric shock.
¾ Never short-circuit the power pack
contacts .

Intended use

The power pack is intended for use with
suitable 72 volt WOLF‑Garten electrical
power tools. Any other use is classed as
an unintended use. The user is liable for
any damages arising from unintended
use.
8

Safety information

WArNING !
Note
DANGEr !
Protection of yourself and others
¾ Vapours can escape if the
power pack is damaged or used
incorrectly . Ensure a supply of
fresh air is available and see a
doctor if you do not feel well . The
vapour can irritate the airways.
¾ Keep children away from the power
pack .
¾ Children must be supervised to
ensure they do not play with the
power pack .
¾ The device can be used by children
aged 8 or older as well as by
persons with limited physical,
sensory or mental abilities or lack
of experience and / or knowledge,
insofar that they are supervised or
have received instructions about
the safe handling of the power pack
and understand the associated
dangers . Otherwise there is a risk of
incorrect use and injuries.
General safety information
¾ Before initial use, perform a visual
inspection of the power pack to
check for damage .
¾ Do not use any damaged, defective
or deformed power packs .
¾ Do not place the power pack in a
fire.
Identification plate
Position
The identification plate is located at the
power pack casing.
Note
The identification is considered
as a document. It must never be
altered or obliterated.
Safety information
Li-High Energy 72V

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis