Herunterladen Inhalt Inhalt Diese Seite drucken

Tips And Notes; Technical Data; Cleaning And Care - Renkforce Easy USB 3.1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Partitioning/formatting your hard drive
• For Windows
operating systems, you can use the control panel for partitioning
®
and formatting.
• When using Windows
7, for example, open "System and security" from the control
®
panel. Click on "Management" and then on "Creating hard drive partitions". Select
the respective hard drive and create a new partition.
• Then format the new partition. Quick formatting is sufficient in such a case.
Performing a normal formatting procedure can take a very long time to complete
depending on the hard drive capacity.
• Contact an expert if you have any doubts regarding partitioning/formatting.

Tips and notes

a) USB 3.1
• USB 3.1 devices are downwardly compatible. That means that the product with
the installed hard drive can also be connected to common USB 3.0, USB 2.0 and
USB 1.1 ports. The transfer speed will be reduced accordingly, though.
• Ideally, USB 3.1 makes speeds up to 10 Gbit/s possible depending on your
computer's hard drive, the hard drive installed in the housing, and the USB 3.1
controller.
• If you want to connect the product via a USB hub, the USB hub has to support
USB 3.1 for the maximum transfer rate to be possible.
b) General
• When the hard drive housing is switched on, the blue LED lights up.
• The LED flashes to indicate reading/writing access to the hard drive.
• Please note that if disconnecting the connection cable during data transmission
files could be damaged or the operating system could shut down. First safely
remove the hard drive through the operating system before disconnecting the
connection cable.
• Always handle hard drives very carefully. Impacts during operation and even for
several seconds after switching off the product can cause the reading/writing
heads to touch the magnetic discs, which in turn could damage the hard drive.
• When connecting the hard drive for the first time, it could take approx. one minute
for the hard drive to be recognized. The length of this time period varies depending
on the operating system.

Cleaning and care

• Disconnect the product from the operating system before cleaning. Wait for at least
30 seconds until all magnetic discs have come to a complete stop. Disconnect the
USB plug from the computer.
• Under no circumstances use aggressive cleanings agents, cleaning alcohol or other
chemical solutions since these can penetrate the housing or impair functionality.
• Clean the product with a dry, fibre-free cloth.
• Besides occasional cleaning, the device is maintenance-free.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product
according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.

Technical data

Operating voltage ................... 5 V/DC (via USB)
Suitable for ............................. 6.35 cm (2.5") SATA I/II/III HDD/SSD
Suitable hard drive height ....... 5 / 7 / 9.5 mm
System requirements .............. Windows
only 32 bit), Vista™ (32/64 bit), 7 (32/64 bit),
8.0 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit)
Mac OS 10.7 and higher
Linux Ubuntu 10.4 and higher
USB standard ......................... USB 3.1, type C
Operating conditions ............... 0 to +40 °C, 10 – 90 % RH
Storage conditions .................. -10 to +65 °C, 5 – 95 % RH
Dimensions (L x W x H) .......... 139 x 83 x 15 mm
Weight .................................... 125 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
XP (Home, Pro, with SP1, SP2, SP3,
®
*1433358_V1_0516_02_IPL_m_en

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis