Intended Use; Safety Instructions; Description Of The Features - MC Crypt GLP24 Bedienungsanleitung

Operating Instructions Operating Instructions
GLP24 Laser LED Light Effect
Item No. 39 45 81

Intended Use

The laser is intended for generating laser lighting effects and is operated with the inbuilt control-
ler.
It is intended for professional use only.
This product may only be operated with the enclosed power supply unit.
The safety regulations and standards for laser operation must be complied with at all times.
The product may only be used in indoor locations, never outdoors. Contact with moisture, for
example in bathrooms, must be avoided.
Any other use than that described above is not permitted and involves additional risks, such as
injuries to the eyes, short circuits and fi re.
No part of the product may be modifi ed or rebuilt, and the housing must not be opened.
All names of companies and products are the trademarks of the respective owners. All rights
reserved.
Warning, this product includes a powerful laser. If the safety instructions are
not observed, there is a high risk of injury.
Read the operating instructions in full before assembling and starting opera-
tions with the laser and observe all the safety instructions included here.

Safety Instructions

The warranty will be void in the event of damage caused by failure to observe
these safety instructions. We do not assume any liability for any resulting
damage.
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions. The
warranty will be void in such cases.
The exclamation mark symbol indicates that important information is includ-
ed in these operating instructions. Please read all the instructions before
using this device; they contain important information on its proper operation.
This symbol on the device indicates that the user should read these operat-
ing instructions prior to using the product.
The symbol with the house is used to inform the user that the device may
only be operated in enclosed rooms.
• The user must comply with the relevant national accident prevention regulations for electrical
equipment.
• This product may only be assembled, commissioned and operated by suitably qualifi ed pro-
fessionals and only in compliance with the requirements stated in this operating manual.
• Adjustments or maintenance should only be carried out by trained professionals who are
aware of the dangers. Improperly executed adjustments might result in dangerous laser radia-
tion.
• For safety reasons, any unauthorised conversion and/or modifi cation to the product is not
permitted.
• Before the product is fi rst put into operation, the operator must notify the responsible accident
insurer and the public authority responsible for occupational health and safety (generally the
industrial inspectorate) and name a person who will be accountable for laser safety.
• When operating the laser equipment, always make sure that the laser beam is directed so that
no one is in the projection area and that unintentional refl ected beams (e.g. from refl ective
objects) cannot be directed into areas where people are present.
• Laser radiation can be dangerous, if the laser beam or its refl ection enters unprotected eyes.
Therefore, before using the laser equipment, familiarise yourself with the statutory regulations
and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser radiation may
result in injuries to the eyes or skin.
• Do not look into the laser beam with optical instruments (e.g. magnifying glasses or binocu-
lars) at all. This will increase the risk of eye injuries drastically.
• Do not point the laser beam at mirrors or other refl ective surfaces. The uncontrolled, refl ected
beam may strike people or animals.
• Only operate the laser in an attended area.
• If possible, restrict the range of radiation by using screens or partitions.
• Mark the range of the laser by barriers or by using warning signs.
• Wherever possible, direct the laser in such a way that it does not cross eye level.
• Caution: if operation settings or procedures other than those described here in these
instructions are used, it could result in exposure to dangerous radiation.
• This product is provided with a Class 3R Laser. Laser signs in different languages are included
in the package. If the sign on the laser is not written in the language of your country, please
Version 04/13
affi x the appropriate sign onto the laser.
Laser warning sign:
°
Labelling at laser outlet:
• Never look directly into the laser beam when the device is in operation. The intense light rays
could temporarily impair your eyesight. Moreover, they may trigger epileptic seizures for vulner-
able persons. This applies in particular to epileptics.
• The device contains no parts that are to be serviced by the user. Therefore, do not open the
device.
• As power supply, only use the supplied mains adapter.
• Only connect the power adaptor to a normal mains socket connected to the public supply.
Before plugging in the power adaptor, check whether the voltage stated on the power adaptor
complies with the voltage of your electricity supplier.
• Power supply must never be plugged in or disconnected with wet hands.
• Never unplug the power packs from the mains socket by pulling on the cable; always use the
grips intended for this purpose.
• For safety reasons, always disconnect the power unit from the mains socket during thunder-
storms.
• The device is not a toy. Children and adolescents cannot judge the dangers of electrical de-
vices and lasers.
• Do not leave packaging materials unattended. It may become a dangerous plaything for chil-
dren.
• Inspect the laser unit from time to time for damage. Should the laser unit or the power supply
unit show any damage, disconnect them from the power supply (unplug the power supply
unit). Do not use the product afterwards, but take it to a specialist workshop.
• Never pour liquids over electrical appliances and never leave objects fi lled with liquids (e.g.
vases) in the vicinity of the device. You run the risk of causing a fi re or a fatal electric shock.
If liquids enter the device, immediately disconnect it from the power supply, unplug the power
supply unit from the mains and consult an expert.
• Do not expose the device to high temperatures, dripping or spraying water, strong vibrations
or heavy mechanical stress.
• Do not place open fl ames, such as burning candles, on or close to the device.
• Do not leave the device in operation when it is unattended. For safety reasons, unplug from
the mains socket after each operation.
• Do not use the device in a tropical climate.
• If in doubt about how to connect the product correctly, or should any questions arise that are
not answered in these operating instructions, please contact our technical service or another
specialist.
• Also observe any further safety instructions in the individual sections of this operating guide.

Description of the Features

• Aurora laser and LED effect
• Red and green laser combined with a blue LED effect
• Automatic and sound-to-light mode
• Motor speed and fl ashing effects adjustable
• Installation or assembly with integrated mounting bracket