Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Description
Amplifi ers need a lot of power. Quite often this cannot be provided by the electrical system of
the vehicle. The battery has an oversized internal resistance. If the air condition is on, already
70 % of the power capacity is utilised.
In case of deep bass and high volume there is not enough energy in order to play music perfectly.
A capacitor stores electric power. Its low internal resistance makes a quick current
output possible. As soon as your amplifi er needs current it can be delivered by the buffer capacitor.
As quick as the buffer capacitor is run down it is reloaded in order to be ready for a great
sound. With this component you get out the best of your sound.
Technical Data
Operating Voltage :
Connection In - and Output: M6
Dimensions:
Certifi cate:
Initial Entry
The buffer capacitor needs to be charged before installation! Otherwise sparks may occur when
connecting. Please use the provided bulb and interpose it in series between the positive pole of
the battery and the positive pole of the capacitor. (see above)
Attention: risk of burning! Please hold the bulb only with a tong not with your fi ngers! Please pay
attention to the connection scheme in order to avoid capacitor damages.The charging process is
fi nished as soon as the capacitor and the vehicle battery have reached the same voltage or the
bulb extinguishes. This process is fi nished within a few seconds. The Voltage of the battery and
the capacitor is measurable via a voltmeter. If either voltages are identical, the capacitor is completely
loaded.
attach to plus
pole
10-16V DC
Ø 75 mm x H 250 mm
E13-10R-02 9997
Charging: when fi rst charging please hold loading
bulb between plus pole of the capacitor
and the battery till displaying >12V.
loading bulb
+
-
- 3 -
attach to ground
of the vehicle
Werbung
