Hafele Dialock MDU Bedienungsanleitung Seite 63

Operating Instructions
Data exchange
between Dialock MDU and terminal using the data cable
(not supplied)
Note:
Condition: the first start-up (programming and deleting keys have
been allocated) of the terminal or a RESET of the terminal must have
been carried out. The MDU key supplied is required to activate the
communication mode on the terminal.
To carry out an exchange of data between the Dialock MDU and the ter-
minal, proceed as follows:
1. Plug the jack plug of the data cable (art. no. 917.90.262) into the
terminal.
3.5 mm stereo jack plug
Data cable
Fig. 9 Fig. 10
Dialock MDU - status: 02.2006 - 732.29.182 61
182_MDU_GB.indd 61 24.02.2006 23:19:07