Your Soundbar; Main Unit; Remote Control - Philips HTL3140B Benutzerhandbuch

2 Your SoundBar

Congratulations on your purchase, and
welcome to Philips! To fully benefit from
the support that Philips offers, register your
SoundBar at www.philips.com/support.

Main unit

This section includes an overview of the main
unit.
a b
(Standby-On/Standby indicator)
a
• Switch the SoundBar on or to standby.
• When the SoundBar is in standby, the
standby indicator turns red.
b SOURCE
Select an input source for the SoundBar.
c Display panel
d +/- (Volume)
Increase or decrease volume.
e NFC tag
Tap the NFC-enabled device on the tag for
Bluetooth connection.
EN
4
HTL3140B 3140S_12_UM_V4.0.indb 4
c d e

Remote control

This section includes an overview of the
remote control.
a
b
c
d
e
f
g
h
i
j
(Standby-On)
a
Switch the SoundBar on or to standby.
b Source buttons
HDMI ARC: Switch your source to HDMI
ARC connection.
: Switch to Bluetooth mode.
USB: Switch to USB mode.
OPTICAL: Switch your audio source to
the optical connection.
COAX: Switch your audio source to the
coaxial connection.
AUDIO IN: Switch your audio source to
the MP3 connection (3.5mm jack).
AUX: Switch your audio source to the
AUX connection.
l
k
7/24/2014 4:59:38 PM