Korg PANDORA stomp Bedienungsanleitung Seite 21

Selecting and setting parameters for modulation
and filter-type modeling effects
C and D buttons (selecting the effect)/
Value dial (setting the parameter)
Selecting delay modeling effects
C and D buttons (selecting the effect)/
Value dial (setting the parameter)
Setting the delay time for the selected delay
C and D buttons (disabled)/Value dial (set the value)
SLAP1–5 (0–500ms), DELAY1–MULTI5 (0–2 sec)
Selecting reverb modeling effects
C and D buttons (selecting the effect)/
Value dial (setting the parameter)
Setting the noise reduction value
C and D buttons (disabled)/
Value dial (set the value: 0.0–10.0)
Increasing this value will produce more noise reduction.
Normally you will adjust this so that you do not hear
obtrusive noise when the strings are lightly muted.
21