Werbung
Verarbeitungshinweise:
Vorbereitung: Bevor Sie den Modellbausatz zusammen bauen, reinigen Sie die einzelnen Teile vom Laserstaub.
Hierzu eignet sich ein Borstenpinsel.
Werkzeuge:
Sie benötigen für den Kartonmodellbau ein Bastelmesser, eine Schere und hochwertigen
Weißleim.
Schneiden:
Lösen Sie die Bauteile aus dem Laserrahmen, indem Sie mit einem Bastelmesser an den
Rahmenaufhängungen entlang schneiden.
Knicken:
Knicken Sie Bauteile mit Knicklinien sehr vorsichtig. Benutzen Sie dazu eventuell eine Tischkante.
Kleben:
Folgen Sie der Baubeschreibung. Verwenden Sie so wenig Kleber wie möglich und verkleben Sie
am besten nicht flächig, sondern punktuell. Um die Verklebungen zusammenzupressen können Sie
Modellbauklemmen verwenden. Wir empfehlen Ihnen einen Winkel um die Teile auszurichten.
Farbliche
Behandlung: Der Bausatz besteht aus farbigem Grafikkarton und benötigt keine farbige Nachbehandlung. Zur
Alterung des Bausatzes empfehlen wir NOCH Patina-Pulver (Art.Nr. 61165) oder NOCH Patina
Créme (Art.-Nr. 61167).
English:
Congratulations! You have just purchased a high-quality laser-cut kit town bridge made from special laser cut
cardboard. NOCH Laser-Cut Kits are precision models which are simply assembled with standard glue.
Read and follow these safety precautions and instructions carefully before use.
This product is a model building item for the experienced modeller and collector. Due to its life-like and true to scale
reproduction and functional form, this product contains peaks, edges and delicate small parts. For assembly, tools
like a sharp cutter, a sharp pair of scissors and special glue are necessary. Therefore, appropriate working with this
model building kit does present a risk of injury! For that reason this product is not for children! Upon completion,
this product is designed to be installed (e.g. fixed with glue) on to a model railway layout, diorama etc. and as a
high-quality decorative item and not a toy.
Keep this kit as well as all accessories (glue, paints, cutter etc) out of reach of children under 3 years of age. Let
children build this kit only if supervised by a competent abult modeller. Only use the parts of this kit included and
recommended accessories. Please wash your hands and tools after modelling. For use of paints and glues please
follow these safety precautions: Do not eat, drink or smoke. Avoid any contact with eyes, skin or mouth. Do not
breathe any vapours. Keep away from ignition sources. Follow the instructions and safety precautions of the
manufacturer carefully. First aid for contact with eyes: Flush the eye with clean holding the eyelid open.
Immediately consult medical advice. Keep these instructions safe.
Helpful Tips:
Preparing:
Before you start to assemble the model kit, please clean the separated parts from laser dust.
You can use a brush.
Tools:.
For model building with carton you need a cutter, scissors and high quality PVAC glue.
Cutting:
Remove the building parts from the laser frame cutting along the engraved suspensions.
Folding:
Carefully fold the building parts along the folding lines using the edge of a table.
Gluing:
Attend the construction manual. Apply as few glue as possible. The best way is to glue on certain
points. In order to press the parts together you can use model building clips. We recommend using
a bracket to adjust the parts.
Colouring:
The kit is made of coloured photo carton that does not need to be coloured. For weathering the kit
we recommend the NOCH Weathering Powder (ref. 61165) or the NOCH Weathering Cream
(ref. 61167)
NOCH GmbH & Co. KG - Lindauer Straße 49 - D-88239 Wangen im Allgäu
info@noch.de - www.noch.de
Werbung
