Machine Data; Safety Instructions - Ferm LHM1011 Originalbetriebsanleitung

ElEcTric lEVEr hOisT
The numbers in the following text correspond
with the pictures at page 2-4
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
intended use
The electric lever hoist is an ideal appliance in
your garage or shed for hoisting all kinds of loads.
Be aware: This machine is only for domestic use.
Improper use:
Do not use outside (tool is not weatherproof)
This machine cannot be used for the industry.
Do not hoist people or animals.
contents

1. Machine data

2. Safety instructions

3. Installation
4. Use
5. Service & maintenance
1. Machine data
Technical specification
Voltage
Input power
*Work rate
Rated load
Lifting height
Lifting speed
Cable diameter
Resister cable
Cable length
Weight
Current
Insulation grade
Protecting grade
Group of mechanisms
230 V, 50 Hz
500 W
S3 20% - 10 min
125kg (without pulley)
250 kg (with pulley)
12m (without pulley)
6m (with pulley)
8m/min (without pulley)
4m/min (with pulley)
3.0 mm
≥ 1870 N/mm
2
12 m
11.5 kg
2.2 A
B
IP54
M1
*S3 = intermittent operation.
During a period of 10 minutes, the machine may
run max. 20% (2.0 min.)
contents of packing
1 Electric lever hoist
1 Pulley + coupling
Brackets + bolts
1 Instruction manual
1 Safety instructions
1 Warranty card
Check the machinesk loose parts and accessories
for transport damage.
Features
Fig. 1
1. Bracket
2. Down limit pole
3. Lever automatic stop
4. Limit block
5. Drum
6. Steel cable
7. Hook
8. Mains cable
9. Remote control
10. Push button
11. (Emergency) stop button
12. Motor
2. safety instructions
list of symbols
Danger of bodily injury or material
damage.
Keep bystanders at a distance.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury.
Read the following safety instructions and also the
enclosed safety instructions.
EN
5