Numark DJ iO Kurzanleitung Seite 16

CHANGING LATENCY
Audio Latency describes the time that it takes for
your soundcard to respond to a command. In
other words, this is the time that it takes for your
computer to process data and output sound.
The lower your latency is, the faster your
computer will respond to commands and output
sound.
For example, with high latency settings you may
start to notice a significant lag when you change
EQ, level and effect settings. In this case, you
will want to decrease your soundcard's latency in
order to achieve a quicker response.
To change latency settings for the DJ IO, please
open the Numark USB Control Panel by clicking
on Start | All Programs | NUMARK | Numark
USB Control Panel.
You will see a drop-down menu on the lower portion of the Numark USB Control Panel. Click on
the drop-down arrow to view the available latency settings and select the desired setting.
Selecting '1024' samples will result in a high audio latency and more lag, while selecting '49'
samples will give you the lowest audio latency and quickest response.
Please note: Depending on your computer, some latency settings may not work
correctly. If you are running on a slower machine and try to use low audio latency
settings ('49', '64', '128' samples), you may experience audio drop-outs and glitches. If
you experience drop-outs or glitches, you will need to increase the audio latency in the
Numark USB Control Panel by choosing one of the higher settings, such as '512' or
'1024' samples.
14