Cleaning And Maintenance; Cleaning Method - Fakir VITALY Benutzerhandbuch

Cleaning and Maintenance

1. Cleaning before use
A. After the complete machine is assembled, make the cover of juice outlet and the
cover of marc outlet respectively installed to the juice outlet and marc outlet of the
squeezing cup, and it shall be at closed status.
B. Connect the power. Add 500 ml water into the squeezing cup from the feed port;
switch on the machine will perform about 30 seconds.
2. Cleaning after use
Clean the disassembled parts with clear water, and please clean them with brush if
meshes are blocked by marc.
Cleaning after use
NOTICE!
Please do not use iron wire brush abradant or sharp
cleaning ls for cleaning.

Cleaning method

ATTENTION!
Wash the disassembled parts with flowing water; if the meshes are blocked up by
dreg, please use the cleaning brush for the cleaning.
Cover of marc outlet
is at closed status
Cover of marc outlet is
at open status
27
EN