I-See Live Mode - Advanced - Rehan i-See Speech Anleitung

5 i-See live mode - Advanced menu
The i-See Speech contains an advanced menu with which you can (de)activate certain
functions of the i-See live mode. You can access the advanced menu by ensuring the
device is switched off, then holding the on/off button approx. 10 seconds until you hear a
beep after the start up tone.
By tapping the brightness icon you can cycle through multiple screens of selectable options.
Tap the plus icon of the zoom button to highlight which mode you wish to change. You can
recognize the highlighted function by the white rounded rectangle around it. Tap the magni-
fi er icon to activate/deactivate your selection.
EN
To save any changes, or to exit without making changes power off the device and power it
on again.
Magnifi cation indicator
When you zoom in or out a magnifi cation indicator shows up in the top left corner that
shows what the magnifi cation factor is. This function is originally on.
Zoom preset
When this function is on the device will go to the last used magnifi cation in high
constrast modes and photo mode when you switch to these functions.
This function is originally on.
22
On the fi rst screen you can select
whether you want the photo mode
to have realistic or high saturation
colors by activating the photo mode
(A) and select which high contrast
mode you want available in your
i-See live mode by activating the
high contast mode you want acti-
vated/deactivated.
The second screen shows advanced
functions.
Crop zoom
The crop zoom function
crops the image on screen
to 50% so that a zoom level
of 1x can be achieved.
This function is originally off.
Sound feedback
When this function is on
you hear a beep when you
change a function. This
function is originally on.