Starting The Device; Switch Screen Function; Tableau; Brake Handle - Rehan i-See Speech Anleitung

3 Starting the device

The on/off switch of the i-See Speech is located at the
lower right hand side on the back of the monitor. To start up
or shutdown the device, hold it for 2 seconds until you hear
the start up or shutdown tone.
Switch Function
Press the On/Off button once while the device is on to toggle between the multiple modes
of the i-See Speech: i-See live mode, i-See Speech mode and external input.
The external input is only available when an HDMI cable is connected to one of the HDMI
EN
ports at the back of the i-See Speech and to an external device.

Tableau

The i-See Speech contains a tableau on which you can place your reading material. The
tableau can move from left to right and from front to back.

Brake Handle

In front of the tableau of the i-See Speech you will find a single brake handle with which you
can control the movement of the tableau. The handle has 4 positions:
Left
Middle-left
Middle-right
Right

4 i-See live mode - controls

The controls of the i-See reading mode can be found below the screen and consist of touch
sensitive pads:

4.1 Display Modes

Tap
Tap this icon to cycle through all available display modes.
Press-and-hold
Press and hold the Display Mode icon to quickly switch between your last used high contrast
mode and the full colour mode.
Swipe
Swipe from right to left to go to the next display mode in the cycle.
Swipe from left to right to go to the previous display mode in the cycle.
20
= The tableau can be moved freely.
= Free movement from left to right.
Front to back movement can be adjusted by 5 millimeter increments
by moving the tableau.
= Free movement from left to right, front to back movement is blocked.
= All movement of the tableau is blocked.