Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Product overview
1
Chuck
2
Chuck ring
3
LED
4
On / Off switch
5
Battery release switch
6
Battery power check
7
Torque ring
8
Rotation direction switch
9
Battery
10
Gear selector
11
Soft grip
Intended use
The tool is intended for driving in and loos-
ening screws as well as for drilling in wood,
metal, ceramic and plastic. The tool is not in-
tended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
CHARGER SET-UP
1
Plug the battery adaptor plug into the
battery seat.
104
EN
Using the tool
1. Set the desired rotation speed on the gear
selector 10.
1
gear Screw driving /
st
Larger diameter drilling
2
gear Smaller diameter drilling
nd
2. To switch on the tool, press the on / off
switch 4. The deeper the on / off
is pressed, the faster the drill driver ro-
tates.
3. Make sure your workpiece can not slip.
Start working, while holding the tool
firmly.
4. To switch off the tool, release the on / off
switch 4.
Caution! If the drill driver is not in
use, centre the rotation direction
switch, in order to lock the drill driver.
Battery power
Press the battery power check button
check the remaining battery power:
Red, Green ,Green, Green
Red, Green, Green
Red, Green
Red
2
Caution! Only use the provided bat-
tery adaptor and battery seat in or-
der to charge the battery.
switch 4
6
to
80-100 %
40-79 %
0-39 %
x %
Werbung
Kapitel
Inhaltsverzeichnis
