Oursson OG2075 Bedienungsanleitung Seite 13

PRODUCT SET, Pic. B-1
Lid.........................................................1pc.
Removable grinding container ....................1pc.
Body..........................................................1pc.
Air pumping pump .........................................1pc.
Container's lid with valve .............................1pc.
Storing container ............................................1pc.
Cleaning brush ...............................................1pc.
Instructions manual...........................................1pc.
ELEMENTS OF DESIGN, Pic. B-2
ON/OFF sensor
Chopping blade
Cord storage
Container's lid with valve,
Air pumping valve
Air pumping sensor
Silicone sealing ring
UTILIZATION
Before firs use wipe the body of the device with a
damp soft cloth. Container
1
5
and lids , wash in warm water with detergent.
Dry. Wipe with a clean dry cloth. Before assembling
or disassembling the device, make sure that the
device is unplugged.
Order of operation, Pic. C
Step 1, Pic. C-1
• Install the grinding container
turning it clockwise, Pic. C-1.
Step 2, Pic. C-2
• Place ingredients into the grinding container
or measure the required amount with the help of
6
container .
Maximal amount of coffee beans is 70 g.
Do not fill it higher than MAX mark.
The device is equipped with protection from
accidental activation.
Step 3, Pic. C-3
• Turn over the storing container and close with it
the grinding container.
Step 4, Pic. C-4
• Plug in the device.
• Press lightly the container and hold it in the
process of grinding.
Pic. B-3
6
, grinding container
)onto the body
2
Step 5
• When the preparation is over, make sure that the
blade has stopped and only after that remove the
container. Unplug the device.
Maximal continuous work of the device – 1 min.
Break between cycles must be 10-15 min.
The device isn't suitable for grinding sticky,
fatty or very solid products: chocolate, nut-
meg, candied fruit, cheese, etc., and garlic.
The device isn't suitable for making pastes
made from fruits, seeds, nuts, and plants,
for example, peanut oil.
NOTE. During brake between cycles, you can close
the container with lid
Step 6, Pic. C-5
• Transfer grinded product into the storing con-
6
tainer .
2
,
Step 7, Pic. C-6
• Tightly close the container with the lid with valve
5
.
Step 8, Pic. C-7,8
• With the help of the pump
to the lid, pump the air from the container. Pump
the air out as many times as required, until the
vacuum indicator doesn't fall down. Pic. С-8-2.
3
,
Step 9, Pic. C-9
• To open the container, slightly rise the valve on
the lid, to release air. Vacuum indicator will rise.
2
Pic. С-8-1. Open the container.
Avoid contamination of the sealing silicone
ring on the lid. You can clean it with a cotton
swab. Do not remove the silicone ring and
silicone valves from the lid.
Vacuum container is ideal fro storing.
RECOMMENDATION ON PREPARATION:
• Grind coffee beans immediately before brewing
coffee.
• Store coffee in a dark place.
• Store coffee in an airtight and vacuum-packed
container.
to avoid dust.
1
, tightly attaching it
4
13