Innogy RWE Smarthome SHC Bedienungsanleitung Seite 5

5 The latest software is downloaded from
the data centre and installed. An 8-digit
PIN is then displayed, which is visible
and valid for 60 minutes.
6 Open an internet browser on your com-
puter and enter the address
www.onlinehelp-sh.com/initial-setup.
7 An installation wizard will guide you step
by step through the login process.
Please enter the serial number and PIN in
the relevant fields.
General information
eQ-3 Entwicklung GmbH hereby declares
that this device meets the basic require-
ments and the other relevant regulations
laid down in Directive 1999/5/EC.
You can find the complete declaration of
conformity at:
www.eq-3.de/rwe-smarthome
eQ-3 Entwicklung GmbH,
Maiburger Str. 36,
D-26789 Leer
Technical data
Name of device
Power supply
Standby power
consumption:
Radio frequency
Max. transmission
power
Open air range
Receiver class
Protection class
SHC
Connector power
pack
Input: 100-240V;
~50/60Hz; 350mA
Output: 5.0V,
1500mA
Approx. 1 Watt
868.3MHz
10mW
100-300m (depen-
ding on radio part-
ner)
SRD Class 2
IP20
Ambient tempera-
ture
Dimensions
(excluding stand)
Weight
Technical changes reserved.
Information about disposal
Do not dispose of the device in the
household
devices are to be disposed of via
the local collection points for old
electronic devices in accordance
with the Waste Electrical and Elec-
tronic Equipment Directive.
5 th English edition, April 2014
Documentation © 2010-2014 RWE Effizienz
GmbH, Germany. All rights reserved. We
accept no liability for errors of a technical
or typographical nature or their conse-
quences. All trademarks and property
rights are recognised.
Changes in response to technical progress
can be made without prior notice.
5
+5°C to +35°C
187x138x28mm
(WxHxD)
350g
waste! Electronic
EN