RUSTA 307512110201 Gebrauchsanweisung Seite 4

ENG
• The light can be angled up/down and locked in the required position with the knobs on
the sides of the light housing.
• Always plug the power cable into an earthed 230V outlet
5.2 Fitting to a stand
• The spotlights can be mounted on a suitable floor stand or frame (sold separately).
• Follow the instructions for the relevant stand/frame.
5.3 Mounting on a wall
• The light should be positioned on the wall as shown below (fig 1).
• Mark the drill holes on the wall using the fastening bracket as a drill template.
• Drill the holes and insert screw plugs if necessary.
• Screw the fastening bracket securely to the wall using appropriate screws as shown
in fig 2 or fig 3.
Fig 1. Mounting instructions
Fig 2. Mounting instructions for LED spotlight (without movement detector)
4