Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Make sure that the spotlight is installed at a suitable distance from
combustible materials and/or surfaces and ensure that there is
sufficient ventilation to allow heat to dissipate.
• Never look directly at the light source, as this may be harmful to the
eyes.
• The light must not be modified.
• Make sure the product is intact. Never use the product if any part of it
is damaged.
• Make sure the power cable is not caught on any sharp object and that
the plug is protected from rain or moisture.
• A damaged power cable should be replaced by a qualified electrician.
• Never immerse the product in water or any other liquid and do not
rinse it under running water.
• Children must not play with this product. Children must not clean or
carry out maintenance unless they are supervised by an adult.
WARNING! If the above precautions are not followed, an accident may
occur, which in turn may lead to serious personal injury or property
damage.
4.2 SPECIAL RISKS
Following the safety precautions minimises the risk of personal injury
and property damage, but risky situations may still occur. Pay particular
attention to the following:
• Risk of electric shock. Always read the safety precautions before use.
• Risk of burns. Do not touch the light when it is on as it may get hot.
5. FITTING
5.1 Fitting LED spotlights in general
• Do not mount the light in a location that is abnormally exposed to vibrations.
• The light can be mounted on a wall using the fastening bracket provided or on a suita-
ble stand.
• Do not mount the light more than 3 metres above the ground.
• For lights with a movement sensor, be sure to mount the light so that it is not activated
unnecessarily by movement/light in the direction of the sensor, such as traffic or
street lights.
3
Werbung
Inhaltsverzeichnis
