Leds And Connections; Hd-Wlu3 - Buffalo HD-GDU3 Benutzerhandbuch

HD-WLU3

LEDs and Connections

1
Power LED
Power On: blue
RAID Maintenance: purple
2
Access LEDs
These indicate the status of the built-in hard drives. The top LED indicates the status for Disk 1 and the bottom LED
indicates the status for Disk 2.
Accessing: blinking green
Rebuilding: blinking red
Error: red
3
Power Mode
See "Power On/Off".
4
RAID Mode Button
Use this button to change RAID modes. A connected computer is not required.
Default: RAID 1
5
USB Connector
Connect to your computer with the included USB cable.
6
DC in
Connect the AC adapter here.
7
Fan
Don't block airflow from the fan.
8
Security Slot
26