Operation; Switching Actuators; Blind Actuator; Resetting To Factory Status - eQ-3 HomeMatic HM-LC-Sw2-FM Installations- Und Bedienungsanleitung

8

Operation

After teaching, simple operating functions are
available using the taught control elements.

8.1 Switching actuators

Depending on the control elements that have been
taught, the switch actuator can be controlled in two
button ON/OFF mode or in toggle mode.

8.2 Blind actuator

Depending on the control elements that have been
taught, the blind actuator can be controlled in two
button UP/DOWN mode or in toggle mode (UP/
STOP/DOWN/STOP).
9

Resetting to factory status

In order to reset the actuator to factory status,
switch the device to teach mode with the (first)
channel button (hold button pressed for at least 4
seconds).
41