eQ-3 HomeMatic HM-LC-Sw2-FM Installations- Und Bedienungsanleitung Seite 28

Operating the device is only permitted with a 230
V/50 Hz alternating current network.
Work on the 230 V network is only permitted by
qualified electricians (in accordance with VDE 0100).
Always observe the applicable accident prevention
regulations.
Disconnect the power to devices before working
on them to prevent electrocution (switch circuit
breaker).
Ignoring installation instructions can cause fires or
other hazards.
This device is to be operated indoors only and keep
away from the influences of humidity, dust and
sunshine or other radiating heat sources.
Load the devices to the specified limits only.
An overload can cause destroy the device, cause
fires or electrical accidents.
The devices are not intended to be isolated.
Do not open the device. It does not contain
any parts to be maintained by the user.
There is a risk of electrical shock by opening the
device. Make sure that the specified wiring and wire
cross-sections are used when connecting to device
terminals.
28