Troubleshooting; Care And Maintenance - Basbau BB204 Bedienungsanleitung

Troubleshooting

You don't getting any signal at all
 Make sure the camera and the monitor are turned on.
 Make sure the power plugs are pushed all the way in.
If the signal is poor, or there is interference
 If there is a microwave oven in use in the path between the camera and
monitor, remove the microwave oven or turn it off.
 Make sure the camera and the monitor are within range of each other
(range of approximately 950 feet; 300 meters in a clear line of sight).
 If the power LED is on but only voice signal input is detected, the monitor
can be in voice-activated mode. Press the VOX button to turn on the screen.

Care and Maintenance

 Keep all parts and accessories out of children's reach.
Fingerprints or dirt on the lens surface can adversely affect camera

performances. Avoid touching the lens surface with your fingers.
Should the lens become dirty, use a blower to blow off dirt and dust, or a

soft, dry cloth to wipe off the lens.
 Keep the camera dry. Precipitation, humidity, and other liquids contain
minerals will corrode electronic circuits.
Do not use or store in dusty, dirty areas.

Do not store in hot areas. High temperatures can shorten the life of

electronic devices and warp or melt certain plastics.
Do not store in very cold areas. When the system warms up (to its normal

temperature), moisture can form inside the case, which may damage
electronic circuit boards.
Do not attempt to open the case. Non-expert handling of the device may

damage the system.
Avoid dropping or strong shocks.

Operate this product using only with the power supply included or provided

as an accessory.
Do not overload electrical outlets or extension cords this can result in fire

or electric shocks.
6