Menu Options - Basbau BB204 Bedienungsanleitung

3

Menu Options

1. Press the menu button
the screen. See Fig. 13.
2. Use the brightness down
through the menu.
3. Press the Zoom/OK
4. The main menu contains 5 submenus.
3
.1 Camera Selection ( Camera Select )
In this submenu you can switch between multiple cameras if the cameras have
been paired. See Fig. 14.
3
.2 Feed Timer Setting ( Feed Timer )
In this submenu you can set up feed timer to remind you the timing. See Fig. 15.
3
Temperature Setting ( Temp. Setting )
.3
1. In this submenu you can choose the temperature unit between degrees
Celsius or degrees Fahrenheit. See Fig. 16.
2. You can set the temperature range of the temperature alert. If you select
"Alert On" to enable the temperature alert and the temperature is outside
the range, a warning sound will be emitted from the monitor unit.
See Fig. 16.
3
Camera Setting ( Camera Setting )
.4
The system comes with a camera unit that has already been paired with the
monitor unit. The "Cam Setting" function gives each baby unit a separate
channel on the monitor unit. This is necessary for configuring additional
camera units.
1. If you want to add a new camera, please choose which number of cameras
you want to add, and then select add camera icon
to confirm your selection (See Fig. 17).
The screen will show "Press the pairing button on the Baby unit" , and then
please also press and hold the power button less than 1 second on the
camera side at the same time.
2. If you want to delete a paired camera, please choose which number of
cameras you want to delete, and then select delete camera icon
the camera (See Fig. 17).
3
.5 VOX Sensitivity ( VOX Sensitivity )
This submenu lets you choose the VOX (voice activation) sensitivity level.
When the level set to high, the screen will turn on by lower sounds.
See Fig. 18.
4
on the monitor unit to display the main menu on
and brightness up
button to confirm a setting.
buttons to navigate
and press the
to delete
button