pal_hpds_lamp_guide_bat2_pal_hpds_lamp_guide 18/08/11 11:14 Page6
3 How to recharge the Philips LED Inspection lamp
3.1
Understanding the charge indicator lights
3.1.1
The red indicator
starts blinking while in use
LED light mode
UV-A mode
• You must set the Philips LED
Inspection lamp onto the
docking station rapidly to
recharge the battery.
See > 4 Maintenance
3.1.2
The blue indicator
is blinking
• The LED Inspection lamp
battery is charging.
3.1.3
The blue indicator
is on
3.5 h
• The LED Inspection lamp
battery is fully recharged.
• You may use your lamp again.
4 Maintenance
Warning
To extend the battery life
• Do not over-discharge the
battery
• Before a longer use, or if you
have not used your lamp for a
longer period of time, perform
a full charge-discharge
cycle.
0
6