Store Data In Encryption Box - Buffalo MiniStation HD-PCU2 Benutzerhandbuch

Create Additional Encryption Box
Please follow the steps below to create a new Encryption Box in addition to
your existing Encryption box.
1
Connect the drive to your PC.
2
If using a USB connection, open the drive in [My Computer].
icon will be in the folder. Click the icon.
3
4
5
Repeat steps 3 - 9 from the front page.
2

Store data in Encryption Box

You can save data to Encryption Box by dragging data you want to encrypt to
the SecureLockMobile window. It will prevent other people to view data stored
in Encrypted Box.
1
It will take approximately 20 minutes to encrypt a 1 GB of
!CAUTIONS!
file (70 minutes for USB1.1 connection). Please do not run
other programs while data is encrypted since the computer is
heavily loaded.
2
Click the [x] button in the upper-right corner of the window to
close the Encryption Box. Your data is now protected.
Click [Cancel].
Click [Encrypt Box –
Create new Box].
Drag the data to encrypt.
3
Open Encryption Box and Retrieve Data
Please follow the steps below to open Encryption Box and retrieve data.
1
Connect the drive to your PC.
2
If using a USB connection, open the drive in [My Computer].
icon will be in the folder. Click the icon.
3
You can specify the Encryption box by clicking the browse button.
4
Follow the instructions on the screen to specify the location to save
the retrieved data. The decrypted data is copied to the PC. To delete
the data in the Encryption Box, select the date to be deleted and click
[Delete les].
Delete Encryption Box
To delete an Encryption Box, select [Encrypt Box], [Delete Box], and then select
the box to be deleted.
1
If an Encryption box has a capacity greater than 4GB, data will be stored in
multiple les. Each le will be named lename.xxx, where xxx is a number.
If any of these files are deleted, then you will not be able to open the
Encryption Box.
Files larger than 4 GB may not be saved to an Encryption Box.
To reinstall SecureLockMobile, copy it from the setup CD.
Check the Encryption
Box name.
Enter the password.
Right Click [OK].
Click the target data in
the Encryption Box.
Click [ Take from Box]
and specify the data
folder.
C h o o s e [ E n c r y p t i o n
Box], then [delete Box].
Notes