Pairing And Connecting; Operation Guide - Yada BT53328F-1 Einbauanleitung

Pairing is not necessary as the unit has already been paired. If you are not able to connect the camera,
please try to pair the camera by the following steps:
1. Go to the monitor and do the following step:
a. Press "Menu"
b. Go to "Pair Camera"
c. Press "Parking Aid line" to confirm
d. The unit is now in pair mode - if the unit was able to search and connect with the camera, the display
will show "Pair OK". If no camera is found, then the display will show "Pair Fail".
e. If you receive a "Pair Fail" message, please call our technical support to assist in troubleshooting.
1. Power ON/OFF
• The Dash or Mirror Monitor will automatically turn ON when it is connected to a power source.
• Hold the power button to turn ON/OFF the unit if necessary.
2. Connection
• Rearview image will be automatically appear on the screen during reverse and will remain in standby
when the vehicle is in any other gear or driving forward.
3. Parking Aid line
• You can turn on the parking aid line by pressing the Parking Aid Line button when the reverse image
appears on screen.

5. PAIRING AND CONNECTING

6. OPERATION GUIDE

7