Stocker 25028 Benutzerhandbuch Seite 37

If you want to set the RUN TIME for separated peri-
ods, spaced by regular stop for 10 minutes, set MIST
CYCLE ON by pressing button B and C and save it
with button A. The timer will start to water for half
of RUN TIME firstly and after ten minutes, another
half of RUN TIME will be executed. If you prefer a
continuous watering for the entire RUN TIME, just
simply set it OFF and press button A to save the
program.
For run time setting under 10 minutes, this function
will be automatically set as OFF.
Example:
If RUN TIME is set to 30 minutes and MIST CYCLE is
set as ON, the program will water 15 minutes and
after 10 minutes it will water for another 15 minu-
tes.
7. Setting of watering frequencies:
The value of CYCLE TIME is flashing, press button B
and C to set the value and press button A to save it.
The reading range of this mode is from 1, 2, 3, 4, 6,
8, 12 hours and from 1 to 7 days.
8. Setting days when watering:
The raindrop icon is blinking on the left side of
Art. 25028
Digital Water Timer