Stocker 25028 Benutzerhandbuch Seite 36

1. The title of Prog. will be displayed, press button B or
C to select ON/OFF, then press button A to save it. If
you set Prog. OFF you can only set the day of week
and current time.
2. Setting of current weekday:
Cursor under MO is blinking which means beginning
the setting mode of days of week. Press button B
and C to select current day and press button A to
save the selection.
3. Setting of current hour:
The hour reading is flashing, press button B and C to
select the current hour and press button A to save
it, repeat this step to select current minutes.
4. Setting of start time:
Repeat (3) to set the time of START.
5. Setting of run time:
The value of RUN TIME is flashing, press button B
and C to set the value and press button A to save
it. The reading range of this mode is from 1 to 199
minutes.
6. Setting of mist cycle (MIST CYCLE):
Art. 25028
Digital Water Timer