Troubleshooting - Logitech Pure-Fi Anywhere Bedienungsanleitung

iPod with
iPod mini iPod (4th Gen.) iPod nano
color display
3 4 6 8
6GB 20GB, U2 20GB, 30GB, U2 1GB, 2GB, 4GB
5
7
40GB 40GB, 60GB
Charging Your Speakers
Your Pure-Fi Anywhere ™ speakers include an internal
rechargeable battery. It must be charged before you
can use it for the first time. The battery will last approximately
10 hours on a single charge.
1. Attach the appropriate plug to the AC adapter.
2. To charge your speakers, connect the AC adapter to your
speakers, then to an electrical outlet. The AC power LED lights
up when the speakers are connected to AC power.
3. The battery level LEDs will blink green while the speakers are charging.
When all LEDs are solid, the battery is fully charged.
4. When running on battery power, a red battery level LED indicates that the battery
needs to be recharged.
The Pure-Fi Anywhere ™ speakers use a non-removable lithium-ion rechargeable
battery. This battery has a limited number of charge cycles and cannot be replaced.
See "Battery Disposal" instructions for further information.
4
English
620-000374 Pure-Fi Anywhere-QSG_4-5 4-5 620-000374 Pure-Fi Anywhere-QSG_4-5 4-5
iPod nano iPod nano
iPod with video iPod classic
(aluminium) with video
9 11 13 9
30GB 2GB, 4GB, 8GB 4GB, 8GB 80GB
10 10
60GB, 80GB 160GB
iPod touch
Listening to Music
1. Turn your Pure-Fi Anywhere
on by pressing the power button.
2. Press Play on your iPod.
3. Use the volume buttons to adjust
the volume level.
14
Note: You can also use the included
8GB, 16GB
wireless remote to turn the speakers
on and off, adjust the volume,
and select tracks.

Troubleshooting

My iPod is in the Dock and playing,
but I can't hear any music.
• Make sure that the speakers are turned on (if the power symbol LED
is green, then the speakers are on).
• Try adjusting the volume level on the speakers.
Use the volume buttons.
• Try turning off the Sound Check feature on your iPod.
• Download the latest version of iTunes (available at apple.com)
and upgrade your iPod to the latest iPod firmware.
• Check iPod output with headphones or other speakers.
There isn't a Universal Dock adapter for my iPod.
• If you have a newer iPod, a Universal Dock adapter for your iPod should
have been included with your iPod when you purchased it.
• If you have a 1st, 2nd, or 3rd generation iPod, you need to use the
Aux input connector on the back of the speakers. To do so, you will
need to purchase a separate cable to connect your iPod to the Aux
input. (1st / 2nd generation iPod do not have a dock connector.
3rd generation iPod are not supported by the speakers' Universal Dock.)
™ speakers
The remote isn't working.
• Point the remote directly at the speakers.
• Make sure the remote sensor isn't being blocked.
(It is located below the iPod.)
• Try using a fresh battery in the remote.
• The speakers may be in a battery saving mode. Push the power button
on the speakers to wake the speakers up.
Will the iPhone work with Pure-Fi Anywhere
To use the iPhone with Pure-Fi Anywhere
an Universal Dock adapter from Apple. When you connect your iPhone,
your iPhone will present you with the option to go into Airplane Mode,
which turns off the communication capability of the iPhone while it's
connected to the speaker. If you choose not to enter Airplane Mode,
you can make and receive calls, but you may experience some occasional
audio interference while listening to music.
The shuffle and repeat buttons do not appear to work.
The buttons do function correctly. However, on some iPod models,
the shuffl e or repeat indicators will not appear on the iPod screen
when you press the shuffl e or repeat button. They will only appear after
the song changes.
For the most up-to-date troubleshooting information,
visit www.logitech.com/support.
™
?
™
, you will need to purchase
5
English
14.12.2007 10:21:24 14.12.2007 10:21:24