Herunterladen Diese Seite drucken

TraxData EZ Player Bedienungsanleitung Seite 7

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

TO POWER ON
Press ►║ / ▓ button to power on the player.
If the inserted memory card has been plugged in properly, both data in the on board flash memory and memory card can
be accessed.
While the player has been powered on and there are existent MP3 / WMA format files in on-board flash memory or
memory card , track number 001 and track title of the very first song will show up on the LCD screen. (If track title of the
first song has not been specified, no characters will show up on the ID3 information section) Otherwise, track number 000
will show up on it.
TO POWER OFF
Press and hold ►║ / ▓ button over 2 seconds to turn it off. Note that if this player is idle for 50 seconds, it will turn itself
off automatically.
PLAYING STORED FILES
While the player is not operating (idle), pressing ►║ / ▓ button will start playback operation.
STOPPING & PAUSING WHILE PLAYING
Press and hold ►║ / ▓ button within 2 seconds to stop playback.
Press ►║ / ▓ button to suspend playback operation.
Press ►║ / ▓ button again to resume playback.
FAST FORWARD
Press and hold ►► ( FF ) button to trigger fast-forward searching while playing.
REWIND
Press and hold ◄◄ ( Rew ) button to trigger rewind searching while playing.
SELECTING FILES
Press ►► ( FF ) or ◄◄ ( Rew ) buttons, and release within 1.5 seconds to select the next or previous music file in the on
board flash memory or memory card.
OP
While the player is not operating (idle mode), press OP button to switch between the following playback sequences:
Symbol
NO SIGNS
All
Shuffle
Shuffle
All
EQUALIZER
Press REC/EQ button to select the next equalizer modes for music playback. Selection cycle in the sequence:
A ─ B CLIPPING
Once the Player is in the process of playback, press OP button to trigger A – B clipping function and set the start point.
Press it again to set the end point of A – B clipping and start playing the selected content. While the selected content has
been clipped, press OP button to cancel A – B clipping and resume playback.
NOTE: You can only clip the content within single music file.
HOLD KEY
Slide the Hold switch to hold position to lock all the above buttons.
HOW TO LISTEN TO MUSIC
Description
Sequential playback
Repeating on-going song playback
Repeating playing all songs in the on board flash memory and memory card
Randomly playing all songs in the on board flash memory and memory card once
Randomly playing all songs in the on board flash memory and memory card continually
3

Werbung

loading