Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Installation
1.1 System requirements
This keyboard requires a PC with USB connection and one of the following operating systems:
1.2 Keyboard connection to the PC
In order to install your keyboard, please perform the following steps:
• Connect your keyboard to a free USB port on your computer.
• All state-of-the-art operating systems with Plug & Play support will recognize your keyboard automatically
and load the required drivers. During the phase of installation your operating system informs you via
changing pop-up information windows on the task-bar about the current status of installation. Please be
patient, until the system informs you finally about the successful installation. The keyboard is now ready
for operation.
Older operating systems not always support automatic recognition of USB or PS/2 devices. If you have
attached your USB receiver and exactly this error occurs on your system, you have the following alternatives
to solve the problem:
• Perform an update of your operating system and return to Step 1.2
• In some cases the installation CD of your operating system is necessary according to the instructions on
your screen. In this circumstance please follow these instructions.
• Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer
BIOS up-dates for download over the Internet.
• Ensure in your system settings, that the used USB connection was not deactivated in your operating
system*.
• Should your system-updates keep out of success, it is recommendable to test the keyboard with another
PC with the same operating system to rule out a hardware damage of the keyboard.
* Please refer details to the manual of your PC.
Version 1.0 (2007/08/20) ● © 2007 by MaxPoint Handelsges. mbH
Windows 98SE / ME / 2000 / XP / Vista
- 3 -
Werbung
