Important Safety Notice - Magnat MONITOR SUB 300A Bedienungsanleitung

Level control (7)
This control is used to set the bass volume according to your preferences. Proceed
as follows:
1. Set the bass control of your amplifier into its center (linear) position.
2. Important: Set the level control to its left stop (lowest volume).
3. Now, play back some music and set the volume control of the amplifier to the
desired level.
4. Set the subwoofer level control to the desired bass level.
Cross-over frequency control (8)
Used to set the upper limit of the subwoofer operating range. The cross-over
frequency should be set to 100 to 150 Hz when the system is used in combination
with shelf loudspeakers or 50 to 100 Hz when used with stand loudspeakers.
Fuse (1)
Only use a fuse with the parameters indicated next to the fuse holder on the rear of
the amplifier.

IMPORTANT SAFETY NOTICE

Never subject the subwoofer to dripping or splashing water. Do not place any flower
vases or other filled recipients on top of the subwoofer.
The distance between the active subwoofer enclosure and the walls of the room or
other objects (e. g. furniture, shelf units) may not be less than 5 cm on any side.
The aluminium plate and cooling fins of the amplifier at the rear of the active
subwoofer serve to cool the built-in amplifier; for this reason, they must also be at
least 5 cm away from all objects and must not be covered (e.g. by a curtain)
GB
10