Renkforce RF-BTHP-100 Bedienungsanleitung Seite 3

Operating instructions
High Performance Bluetooth Receiver/Transmitter
RF-BTHP-100
Item no. 1628712
Intended use
The product is intended to be used as a wireless transmitter/receiver for audio devices. In the
transmitter mode it transmits an audio signal received through the analogue or optical audio
input via Bluetooth wireless technology. In the receiver mode, it can transfer audio signals
transmitted from Bluetooth devices to an audio device via cable. The product features optical
and 3.5 mm jack sockets. In addition, the product can connect an audio device with speakers/
headphones via cables directly. Power is supplied via USB.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits, fire and electric shocks. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Transmitter/receiver
• USB cable
• 3.5 mm jack cable
• RCA cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle indicates that there is a risk to your
health, e.g. due to an electric shock.
The symbol with an exclamation mark in a triangle indicates important instructions
contained in these operating instructions that must be followed.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Never pour liquids over electrical devices or place objects filled with liquid next
to the product. If liquid or an object does enter the interior of the device, power
down the respective socket (e.g. switch off the circuit breaker), and then remove
the mains plug from the mains socket. Discontinue use and take the product to a
specialist repair centre.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation generated may destroy the product. Allow the
product to reach room temperature before connecting it and putting it to use. This
may take several hours.
• Make sure that the cables are not pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This may cause an injury.
• Do not listen to excessively loud music over an extended period of time, as this
may cause hearing damage.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
2
1
12 11 10
17 16
1 Mode switch
2 Speaker
3 Antenna
4 RX TX switch
5 + button
6 Connected devices indicator
7 – button
8 Codec indicator
9 Arrow button
5
9 8 7 6
15 14 13
10 Audio mode indicator
11 Bluetooth button
12 RX TX mode indicator
13 DC IN port
14 TX AUX socket
15 TX OPTICAL socket
16 RX OPTICAL socket
17 RX AUX socket
3
4