Hama S-Giga Bedienungsanleitung Seite 7

• Start pairing with your mobile phone as described in the
instruction manual for your phone. Follow the instructions on
your telephone's display.
• Your telephone searches for compatible devices in the Bluetooth
environment.
• When your phone has "found" the headset, this is shown on
the display.
• Select the headset and follow the remaining instructions on the
phone or in the operating instructions of the phone.
• If you are asked for the passkey or PIN, enter "0000".
• Pairing is now complete. The red LED goes out. The blue LED
now fl ashes regularly, indicating that it is ready for operation
(standby). The headset is now ready for operation and can be
used.
Use/Call management
Please note that some mobile phones do not support all of the call
management functions. This depends on whether the mobile phone
supports the hands-free profi le, "headset" and/or "hands-free".
For more information, refer to the operating instructions of your
mobile phone.
Accepting, ending, and rejecting calls
• You can answer incoming calls using the headset. When you wish
to accept an incoming call, press the "MFB" button.
• Press the "MFB" button again to end the call.
• To reject incoming calls, press the "MFB" button for 3 seconds.
12
Making calls
Ensure that your headset is "paired" with the telephone. Calls are
made as usual, with the exception that the headset is used to make
the call.
Making calls using voice dialling
To make calls using voice dialling, the corresponding voice profi les
must be set up/stored in your phone. Your telephone must also
support this function in Bluetooth mode (hands-free profi les only).
For more information, please refer to the operating instructions of
your mobile phone. Voice dialling using the headset operates in the
same manner as if you were making a call using the phone. The
only difference is that voice dialling is activated using the headset,
not the phone!
• Press the "MFB" button.
• A brief sound indicates that voice dialling has been activated.
• Say the correct name or the voice profi le of the person you wish
to call.
• The call will be made.
Transferring calls
Press and hold the "MFB" button for about 3 seconds during a call
to transfer calls from the headset to the mobile phone and from the
mobile phone to the headset.
Redial
Briefl y pressing the "MFB" button twice redials the last telephone
number dialled.
13