Switch Off/On Mains; Programming Additional Transmitters - AEG 2000 Bedienung Und Installation

Programming the transmitter
24
2.

Switch off/on mains.

The IR Radio Dimmer 2000 now remains in programming mode
for 5 minutes.
3.
Press the
4.
v button imme-
diately when
100% heat
output appears
Press the
5.
b button immedi-
ately when
50% heat output
appears.
The transmitter is programmed.
The radiant heater
switches between
100% and 50% of its
heating power for
2 minutes.
Heating switches off
for a short time
Heating switches off

Programming additional transmitters

Programming additional transmitters
Programming possible for max. 16 transmitters.
To program further transmitters, proceed as follows:
1.
Programmed transmitter
2. Press the
v button
immediately
when 100%
heat output
appears.
Press the
3.
b button
immediately
when 50% heat
output appears
The transmitter is programmed.
25
or
Heating system
alternates between
100% and 50%
and
output for
2 minutes.
Heating switches off
for a short time
Heating switches off