Alarm Mode - BASETech WS-9130-IT Bedienungsanleitung

d) Alarm mode
Setting the alarm time
• Press and hold the ALARM button until the indicator ALM appears at the top of the display
and the alarm hour flashes.
• While the alarm hour flashes, press the + button to set the hour.
• Press the ALARM button to confirm. The minute indicator flashes.
• Press the + button to set the minutes.
• Press the ALARM button to confirm. The weather station is in normal display mode again.
Activating / deactivating the alarm function
• To activate/deactivate the alarm function, press the ALARM button in normal display mode.
This will display the alarm time for a brief moment.
• When the alarm function is active, the alarm icon appears to the left of the time in normal
display mode.
• When the alarm function is deactivated, the alarm icon is not displayed.
Turning off the alarm signal, snooze function
• When the alarm sounds, press the MIN/MAX RESET button to activate the snooze function.
The alarm signal stops and will sound again in 10 minutes.
The alarm icon flashes while the snooze function is active.
• To switch off the alarm, press one of the three remaining buttons.
The alarm will sound for approx. 85 seconds if you do not turn it off in this time.
37