Herunterladen Inhalt Inhalt Diese Seite drucken

Garantie; Description Of Parts; Introduction; Use For The Intended Purpose - Eufab 16612 Bedienungsanleitung

Intelligentes batterieladegerät, für 6/12 volt agm, gel- und bleibatterien geeignet
Vorschau ausblenden Andere Handbücher für 16612:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
für Elektro- und Elektronikschrott. Sie leisten damit einen wichtigen Beitrag zum
Umweltschutz.

9. Garantie

Für dieses Produkt gewähren wir eine 2 jährige Garantie. Diese Garantie gilt bei
sachgerechter Verwendung und deckt keine Schäden ab, die durch Missbrauch
entstanden sind.
Intelligent battery charger
GB Item No. 16612
Suitable for 6/12 volt AGM, gel and lead-acid batteries.

1. Description of parts

A. Battery charger
B. Control panel / display
C. Mains power cable
D. Charger cable
E. Battery clip black / negative (-)
F. Battery clip red / positive (+)
1. 12 V slow charge (12 V / 0.8 A)
2. 12 V fast charge (12 V / 3.8 A)
3. Winter mode (only for 12 V)
4. 6 V slow charge (6 V / 0.8 A)
5. Battery charge level
6. Voltage
7. Incorrect polarity warning
8. Defective battery
9. Clip
10. Rate of charge

2. Introduction

Thank you for selecting the EUFAB battery charger.
Please read these instructions for use carefully and completely, and take note
of all instructions and specifications.

3. Use for the intended purpose

The battery charger is designed for charging lead-acid, gel and AGM batteries
with a voltage of 6 or 12 V. Other batteries are not to be charged with this unit.
The charger is not to be used as a starting aid. First of all charge the vehicle's
battery fully, then remove the charger before attempting to start the vehicle.
The charger must not be used as a source of direct current, nor for any other
purposes.
The battery charger is designed for use in a dry, protected environment and in
temperatures ranging from -5 °C to +40 °C.
8

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis