Herunterladen Inhalt Inhalt Diese Seite drucken

Disconnecting The Charger; Maintenance; Disposal; Guarantee - Eufab 16612 Bedienungsanleitung

Intelligentes batterieladegerät, für 6/12 volt agm, gel- und bleibatterien geeignet
Vorschau ausblenden Andere Handbücher für 16612:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
Charging program for frost
Special charging program for 12 V batteries of 14 Ah to 120 Ah capacity for
temperatures below 0 °C. Effective charging using a higher charging voltage
and high rate of charge. Indicated by a snowflake symbol.
Battery charge retention mode
As soon as the battery is fully charged, the battery charger automatically
switches over to charge retention mode. This is appropriately shown in the
display by the full battery symbol.
Reactivation charging mode
If the charge measured in the battery is between 7.3 and 10.5 volt, this is a
critical range since with a voltage at the bottom end of this range it is not clear
whether the battery is a fully-charged 6 V battery (which can register a voltage
of 7.3 V) or a deep-discharged 12 V battery. If you try to start charging a
battery, a pause of 1.5 minutes is initiated, after which the unit performs another
check measurement.
If after the 1.5 minutes, the voltage registers between 7.5 and 10.5 volts, the
battery is recognised as a 12 V battery and the charging process commences
with a gentle impulse charge in motorbike mode, to reactivate the battery.

Disconnecting the charger

Caution: first of all, remove the mains plug from the socket, and observe the
sequence of disconnection. In this way you avoid the generation of sparks. As
charging the battery can produce highly explosive gas, this is extremely
important for your own safety.
Disconnect the charger from the power supply.
Next, remove the black clip connection (negative) from the battery. Now remove
the battery clip from the positive battery terminal (red clip).

7. Maintenance

Provided it is used only for its intended purpose, the unit is maintenance free.
Clean the unit with care, using a dry cloth.
If either casing or cable displays signs of damage, disconnect it immediately
from the power supply and contact the manufacturer or your supplier.

8. Disposal

Packaging materials are raw materials and can thus be re-used. Take them to
your local recycling depot in the interests of protecting the environment.
In accordance with current EC directives, electrical and electronic appliances
may not be disposed of with domestic waste. Dispose of the old appliance at
your local collecting point for electric and electronic waste and thus make a
valuable contribution to environmental protection.

9. Guarantee

We offer a two-year guarantee on this product. The guarantee covers use for its
intended purpose and does not cover damage caused by misuse.
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis