GOAL ZERO NOMAD 100 Bedienungsanleitung Seite 2

GET TO KNOW YOUR GEAR
8mm Goal Zero Connector
HOW TO CONNECT
Connect a Nomad 100 Solar Panel to a Goal Zero Yeti Portable Power Station or Sherpa Power Pack by
inserting the 8mm blue-ringed connector into the 8mm input on the units.
HOW IT WORKS Nomad 100
Solar Panel
Goal Zero Yeti Laptop
Portable Power Station
HOW TO CHAIN
The safest and easiest way to chain Nomad 100 Solar Panels is by using an 8mm to APP Combiner Cable.
This plug-and-play method ensures you safely chain solar panels for recharging Goal Zero Portable Power
Stations.
NOTE: Do not plug chained Nomad 100 Solar Panels into the Goal Zero Yeti 150, Yeti 400, Yeti 400
Lithium Portable Power Stations or Sherpa 100 Power Packs as this exceeds their input ratings.
OPTIONAL CABLES
Goal Zero's 8mm Extension Cables provide greater distance between your solar panels and your power
stations. Purchase these from GoalZero.com.
TECHNICAL SPECIFCATIONS
Nomad 100 Solar Panel
Charges the following: Approx. Charge time:
Goal Zero Yeti 400 8-16 hrs
Goal Zero Yeti 1250 24-48 hrs
Goal Zero Yeti 1400 29-57 hrs
Lithium
Solar Panel
Rated Power 100W
Open Circuit Voltage Voc 18-22V
Short Circuit Current Isc 8A
Cell Type Monocrystalline
Ports
Be sure to activate your warranty at goalzero.com/warranty
Solar Port 14-22V, up to 8A
(blue, 8mm, male) (100W max)
General
Weight 10.2 lbs (4.6 kg)
Dimensions (unfolded) 20.5 x 59.5 x 1 in
(52 x 151.1 x 2.54 cm)
Dimensions (folded) 20.5 x 15.5 x 2 in
(52 x 39.37 x 5.08 cm)
Certs
Warranty 12 months