Aligning The Device; Cleaning; Disposal; Disposal Of The Device - Powerfix KAA 31 A1 Bedienungsanleitung

Aligning the device

♦ Align the device so that the dummy lens
area for which you want to simulate surveillance.
♦ Loosen the joint screw
♦ Tighten the joint screw
♦ Loosen the joint screw
♦ Tighten the joint screw
device.

Cleaning

CAUTION!
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture
can penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
♦ Clean the surfaces of the device with a soft, dry cloth. For stubborn
dirt, use a slightly damp cloth with a mild detergent.

Disposal

Disposal of the device

The adjacent symbol of a crossed-out wheelie bin means that this device is
subject to Directive 2012/19/EU.
This directive states that this device may not be disposed of in normal
household waste at the end of its useful life, but must be brought to a
specially set-up collection point, recycling depot or disposal company.
This disposal is free of charge for the user. Protect the
environment and dispose of this device properly.
You can obtain further information from your local disposal company
or the city or local authority.
│
■ 8 GB
is pointing towards the
to swivel the device max. 90° vertically.
when you have vertically aligned the device.
to swivel the device max. 360° horizontally.
when you have horizontally aligned the
KAA 31 A1