Connection Example - Schwaiger DTA4000 011 Bedienungsanleitung Und Sicherheitshinweise

USER GUIDE
CONNECTING THE OUTDOOR AERIAL FOR TV SETS WITHOUT INTEGRATED
DVB-T(2) RECEIVER
Connection example (LEFT)
CONNECTION EXAMPLE (LEFT)
Power supply via the DVB-T(2) receiver
1. Make sure that the television set is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial
connection port on the DVB-T(2) receiver.
3. You can now turn on the television set and the recei-
ver.
4. In the menu of the DVB-T2 receiver, switch on the 5 V
power supply to power the amplifier integrated in the
aerial through the coaxial cable.
5. You can now look for channels that you can receive.
If necessary, refer to the television's user manual for
guidance.
CONNECTING THE OUTDOOR AERIAL FOR DAB+ RADIOS

Connection example:

Power inserter
Receiver
TV
Power supply unit
Connection example (RIGHT)
Power inserter
CONNECTION EXAMPLE (RIGHT)
Power supply via the supplied external power sup-
ply unit
1. Make sure that the DVB-T(2) receiver is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial
connection port on the Power inserter.
3. Now plug the cable of the external power supply unit
into the 12 V DC 100 mA socket of the power inserter
and the external power supply unit into a 230 V AC
socket.
4. Connect the coaxial cable of the power inserter to the
aerial input of your DVB-T2 receiver.
5. When making this connection, it doesn't matter whet-
her the 5 V power supply of the DVB-T2 receiver is
activated or not.
6. You can now turn on the television set and the
DVB-T(2) receiver.
7. You can now look for channels that you can receive. If
necessary, refer to the DVB-T2 receiver's user manual
for guidance.
Radio (IEC) adapter
12
Power supply unit
Receiver
TV