Schwaiger DTA4000 011 Bedienungsanleitung Und Sicherheitshinweise Seite 11

CONNECTING THE OUTDOOR AERIAL FOR TV SETS WITH INTEGRATED
DVB-T(2) RECEIVER
Connection example (left)
TV
CONNECTION EXAMPLE (LEFT)
Power supply via the built-in DVB-T(2) receiver in
the TV set
1. Make sure that the television set is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial
connection port on the television set.
3. You can now turn on the television set.
4. Switch on the 5 V power supply on your TV screen
menu to power the external amplifier via the coaxial
cable.
5. You can now look for channels that you can receive.
If necessary, refer to the television's user manual for
guidance.
Connection example (right)
Power supply unit
CONNECTION EXAMPLE (RIGHT)
Power supply via the supplied external power sup-
ply unit
1. Make sure that the television set is switched off.
2. Plug the outdoor aerial's coaxial cable into the aerial
connection port on the Power inserter.
3. Now plug the cable of the external power supply unit
in the "12 V DC 100 mA" socket in the Power inserter
and the external power supply unit into a 230 V AC
socket.
4. Connect the short coaxial cable of the power inserter
to the aerial input of your TV set.
5. When making this connection, it doesn't matter whet-
her the 5 V power supply of the TV is activated or not.
6. You can now turn on the television set and look for
channels that you can receive. If necessary, refer to
the television's user manual for guidance.
11
USER GUIDE
Power inserter
TV